Back To Smart Meter
Smart Meter List
- EDMI Mk7A
- EDMI Mk7C
- EDMI Mk10A
- EDMI Mk10D
- Elster A1100
- Itron ACE2000 Type 292
- Itron ACE1000 SMO
- Itron EM211 Type 902
- Landis + Gyr E350
- Landis + Gyr EM500
- Landis + Gyr EM1000
- Landis + Gyr EM1200
- Landis + Gyr EM3330
- Landis + Gyr EM5100
- MATelec Type FKW-14110
- Nilsen EMS2500 Analyser
- Secure i-Credit 400
- Secure i-Credit 500
- Secure i-Credit 500b
- Sprint 200
- Sprint 211
Smart Meter List
- EDMI Mk7A
- EDMI Mk7C
- EDMI Mk10A
- EDMI Mk10D
- Elster A1100
- Itron ACE2000 Type 292
- Itron ACE1000 SMO
- Itron EM211 Type 902
- Landis + Gyr E350
- Landis + Gyr EM500
- Landis + Gyr EM1000
- Landis + Gyr EM1200
- Landis + Gyr EM3330
- Landis + Gyr EM5100
- MATelec Type FKW-14110
- Nilsen EMS2500 Analyser
- Secure i-Credit 400
- Secure i-Credit 500
- Secure i-Credit 500b
- Sprint 200
- Sprint 211
EDMI Mk7A
Impulse rate to enter into the ems app:
1000 (can be 10-1000)
Select the correct dropdown option for your meter:
imp/kwh
Note: Some smart meters, including EDMI, don’t display the impulse rate. In most cases the impulse rate will be 1000, but may occasionally be a different value such as 100. You can perform an impulse rate test to confirm if it is correct.
Attach the self adhesive plastic mount – allowing the red flashing light to show through the hole (as shown below). Gently attach your Energy Advisor’s sensor into the plastic mount. View the complete install process
IMPORTANT – SOLAR HOUSEHOLDS
Electricity Advisor works with most EDMI solar meters. Check your meter at midday on a sunny day. It is compatible if the pulse 1 light stops flashing while your solar system is exporting to the grid. If the pulse 1 light flashes while your solar system is exporting to the grid the meter is NOT compatible with the Electricity Advisor.
![](https://emeraldhome.com.au/wp-content/uploads/2021/08/Layer-1-276x300.png)
EDMI Mk7C
Impulse rate to enter into the ems app:
1000 (can be 10-1000)
Select the correct dropdown option for your meter:
imp/kwh
Note: Some smart meters, including EDMI, don’t display the impulse rate. In most cases the impulse rate will be 1000, but may occasionally be a different value such as 100. You can perform an impulse rate test to confirm if it is correct.
Attach the self adhesive plastic mount – allowing the red flashing light to show through the hole (as shown below). Gently attach your Energy Advisor’s sensor into the plastic mount. View the complete install process
IMPORTANT – SOLAR HOUSEHOLDS
Electricity Advisor works with most EDMI solar meters. Check your meter at midday on a sunny day. It is compatible if the pulse 1 light stops flashing while your solar system is exporting to the grid. If the pulse 1 light flashes while your solar system is exporting to the grid the meter is NOT compatible with the Electricity Advisor.
![](https://emeraldhome.com.au/wp-content/uploads/2021/08/mk7c-278x300.png)
EDMI Mk10A
Impulse rate to enter into the ems app:
1000 (can be 10-1000)
Select the correct dropdown option for your meter:
imp/kwh
Note: Some smart meters, including EDMI, don’t display the impulse rate. In most cases the impulse rate will be 1000, but may occasionally be a different value such as 100. You can perform an impulse rate test to confirm if it is correct.
Attach the self adhesive plastic mount – allowing the red flashing light to show through the hole (as shown below). Gently attach your Energy Advisor’s sensor into the plastic mount. View the complete install process
IMPORTANT – SOLAR HOUSEHOLDS
Electricity Advisor works with most EDMI solar meters. Check your meter at midday on a sunny day. It is compatible if the pulse 1 light stops flashing while your solar system is exporting to the grid. If the pulse 1 light flashes while your solar system is exporting to the grid the meter is NOT compatible with the Electricity Advisor.
![](https://emeraldhome.com.au/wp-content/uploads/2021/08/image_2021_08_03T05_37_49_326Z-284x300.png)
EDMI Mk10D
Impulse rate to enter into the ems app:
1000 (can be 10-1000)
Select the correct dropdown option for your meter:
imp/kwh
Note: Some smart meters, including EDMI, don’t display the impulse rate. In most cases the impulse rate will be 1000, but may occasionally be a different value such as 100. You can perform an impulse rate test to confirm if it is correct.
Attach the self adhesive plastic mount – allowing the red flashing light to show through the hole (as shown below). Gently attach your Energy Advisor’s sensor into the plastic mount. View the complete install process
IMPORTANT – SOLAR HOUSEHOLDS
Electricity Advisor works with most EDMI solar meters. Check your meter at midday on a sunny day. It is compatible if the pulse 1 light stops flashing while your solar system is exporting to the grid. If the pulse 1 light flashes while your solar system is exporting to the grid the meter is NOT compatible with the Electricity Advisor.
![](https://emeraldhome.com.au/wp-content/uploads/2021/08/mk10D-286x300.png)
Elster A1100
Impulse rate to enter into the ems app:
1000
Select the correct dropdown option for your meter:
imp/kwh
Attach the self adhesive plastic mount – allowing the red flashing light to show through the hole (as shown below). Gently attach your Energy Advisor’s sensor into the plastic mount. View the complete install process
![](https://emeraldhome.com.au/wp-content/uploads/2021/08/ElsterA1100-300x282.png)
Itron ACE2000 Type 292
Impulse rate to enter into the ems app:
1000
Select the correct dropdown option for your meter:
imp/kwh
Attach the self adhesive plastic mount – allowing the red flashing light to show through the hole (as shown below). Gently attach your Energy Advisor’s sensor into the plastic mount. View the complete install process
![](https://emeraldhome.com.au/wp-content/uploads/2021/08/itron-300x286.png)
Itron ACE1000 SMO
Impulse rate to enter into the ems app:
800
Select the correct dropdown option for your meter:
imp/kwh
Attach the self adhesive plastic mount – allowing the red flashing light to show through the hole (as shown below). Gently attach your Energy Advisor’s sensor into the plastic mount. View the complete install process
![](https://emeraldhome.com.au/wp-content/uploads/2021/08/itron1-300x185.png)
Itron EM211 Type 902
Impulse rate to enter into the ems app:
1000
Select the correct dropdown option for your meter:
imp/kwh
Attach the self adhesive plastic mount – allowing the red flashing light to show through the hole (as shown below). Gently attach your Energy Advisor’s sensor into the plastic mount. View the complete install process
![](https://emeraldhome.com.au/wp-content/uploads/2021/08/409z-1-298x300.png)
Landis + Gyr E350
Impulse rate to enter into the ems app:
1000
Select the correct dropdown option for your meter:
imp/kwh
Note: Many models will display the Impulse rate as 1 imp/Wh which is the equivalent to 1000 imp/KWH.
Attach the self adhesive plastic mount – allowing the red flashing light to show through the hole (as shown below). Gently attach your Energy Advisor’s sensor into the plastic mount. View the complete install process
![](https://emeraldhome.com.au/wp-content/uploads/2021/08/landis-283x300.png)
Landis + Gyr EM500
Impulse rate to enter into the ems app:
1
Select the correct dropdown option for your meter:
wh/imp
Attach the self adhesive plastic mount – allowing the red flashing light to show through the hole (as shown below). Gently attach your Energy Advisor’s sensor into the plastic mount. View the complete install process
![](https://emeraldhome.com.au/wp-content/uploads/2021/08/landis1-300x280.png)
Landis + Gyr EM1000
Impulse rate to enter into the ems app:
1
Select the correct dropdown option for your meter:
wh/imp
Attach the self adhesive plastic mount – allowing the red flashing light to show through the hole (as shown below). Gently attach your Energy Advisor’s sensor into the plastic mount. View the complete install process
![](https://emeraldhome.com.au/wp-content/uploads/2021/08/landis1-300x280.png)
Landis + Gyr EM1200
Impulse rate to enter into the ems app:
1
Select the correct dropdown option for your meter:
wh/imp
Attach the self adhesive plastic mount – allowing the red flashing light to show through the hole (as shown below). Gently attach your Energy Advisor’s sensor into the plastic mount. View the complete install process
![](https://emeraldhome.com.au/wp-content/uploads/2021/08/Background-1-300x286.png)
Landis + Gyr EM3330
Impulse rate to enter into the ems app:
1
Select the correct dropdown option for your meter:
wh/imp
Attach the self adhesive plastic mount – allowing the red flashing light to show through the hole (as shown below). Gently attach your Energy Advisor’s sensor into the plastic mount. View the complete install process
![](https://emeraldhome.com.au/wp-content/uploads/2021/08/3330-300x300.png)
Landis + Gyr EM5100
Impulse rate to enter into the ems app:
1
Select the correct dropdown option for your meter:
wh/imp
Attach the self adhesive plastic mount to align over the ‘Test’ indicator – allowing the the invisible infrared output through the hole (as shown below).Gently attach your Energy Advisor’s sensor into the plastic mount. View the complete install process
![](https://emeraldhome.com.au/wp-content/uploads/2021/08/5100-300x292.png)
MATelec Type FKW-14110
Impulse rate to enter into the ems app:
1000
Select the correct dropdown option for your meter:
imp/kwh
Attach the self adhesive plastic mount – allowing the red flashing light to show through the hole (as shown below). Gently attach your Energy Advisor’s sensor into the plastic mount. View the complete install process
![](https://emeraldhome.com.au/wp-content/uploads/2021/08/matelec1-266x300.png)
Nilsen EMS2500 Analyser
Impulse rate to enter into the ems app:
1
Select the correct dropdown option for your meter:
wh/imp
Attach the self adhesive plastic mount – allowing the red flashing light to show through the hole (as shown below). Gently attach your Energy Advisor’s sensor into the plastic mount. View the complete install process
![](https://emeraldhome.com.au/wp-content/uploads/2021/08/nilsen-269x300.png)
Secure i-Credit 400
Impulse rate to enter into the ems app:
1600
Select the correct dropdown option for your meter:
imp/kwh
Attach the self adhesive plastic mount – allowing the red flashing light to show through the hole (as shown below). Gently attach your Energy Advisor’s sensor into the plastic mount. View the complete install process
![](https://emeraldhome.com.au/wp-content/uploads/2021/08/secure-270x300.png)
Secure i-Credit 500
Impulse rate to enter into the ems app:
3200
Select the correct dropdown option for your meter:
imp/kwh
Attach the self adhesive plastic mount – allowing the red flashing light to show through the hole (as shown below). Gently attach your Energy Advisor’s sensor into the plastic mount. View the complete install process
![](https://emeraldhome.com.au/wp-content/uploads/2021/08/credit-500-275x300.png)
Secure i-Credit 500b
Impulse rate to enter into the ems app:
3200
Select the correct dropdown option for your meter:
imp/kwh
Attach the self adhesive plastic mount – allowing the red flashing light to show through the hole (as shown below). Gently attach your Energy Advisor’s sensor into the plastic mount. View the complete install process
![](https://emeraldhome.com.au/wp-content/uploads/2021/08/credit-500b-300x300.png)
Sprint 200
Impulse rate to enter into the ems app:
800
Select the correct dropdown option for your meter:
imp/kwh
Attach the self adhesive plastic mount – allowing the red flashing light to show through the hole (as shown below). Gently attach your Energy Advisor’s sensor into the plastic mount. View the complete install process
![](https://emeraldhome.com.au/wp-content/uploads/2021/09/sprint-200-300x274.png)
Sprint 211
Impulse rate to enter into the ems app:
1000
Select the correct dropdown option for your meter:
imp/kwh
Attach the self adhesive plastic mount – allowing the red flashing light to show through the hole (as shown below). Gently attach your Energy Advisor’s sensor into the plastic mount. View the complete install process
![](https://emeraldhome.com.au/wp-content/uploads/2021/08/211-287x300.png)
![](https://emeraldhome.com.au/wp-content/uploads/2021/08/loader.gif)